Products

Product Name : Children Nursing Bed C202

Q'ty :
Enlargement
proimages/childr19.jpg

Specifications:
  L2000×W950mm×H1400mm
  Height of bed surface: H585~910mm
  Dimension of bed surface: 1880×780mm
 
 
Material:
  The bed is made of steel and coated with power baking varnish.
Bed panel is made of ABS and molded.
 
 
Function:
  Backboard can ascend 80 degree and footboard can ascend 40 degree.
  Ascending and descending scope of bed surface: 325 cm
 
 
Fittings:
  One set of grating guardrail
  One piece of two-section drop frame
  One set of 5″brake wheel of dust-proof shield
 
 
Explanation:
  The design concept of children medical bed mainly focuses on the safety of victims, operational demands and convenience of nursing personnel.
  Grating guardrails are equipped on the both sides of bed, which are 60cm in height and can prevent children from climbing or falling while turning over. And the increasing and decreasing switch of guardrail is safe switch, which can prevent children from danger while playing and turning on. The whole bed is equipped with ducts with rounded upper covers except processed steel tube of acute angle, and all screws are the cup head for avoiding scratch.
  The bed was designed as three-rocker type based on its function, besides the backboard and footboard can be lifted, the bed can receive inbuilt ascending and descending or; and the bed surface can be operated conveniently for nursing personnel while ascending, and the effective maximal height of guardrail would be achieved while descending.(If apply the ascending and descending method of common medical bed, the guardrail with a height of 60cm would result in that it cannot be operated for higher bed).
proimages/childr19.jpg

Specifications:
  L2000×W950mm×H1400mm
  Height of bed surface: H585~910mm
  Dimension of bed surface: 1880×780mm
 
 
Material:
  The bed is made of steel and coated with power baking varnish.
Bed panel is made of ABS and molded.
 
 
Function:
  Backboard can ascend 80 degree and footboard can ascend 40 degree.
  Ascending and descending scope of bed surface: 325 cm
 
 
Fittings:
  One set of grating guardrail
  One piece of two-section drop frame
  One set of 5″brake wheel of dust-proof shield
 
 
Explanation:
  The design concept of children medical bed mainly focuses on the safety of victims, operational demands and convenience of nursing personnel.
  Grating guardrails are equipped on the both sides of bed, which are 60cm in height and can prevent children from climbing or falling while turning over. And the increasing and decreasing switch of guardrail is safe switch, which can prevent children from danger while playing and turning on. The whole bed is equipped with ducts with rounded upper covers except processed steel tube of acute angle, and all screws are the cup head for avoiding scratch.
  The bed was designed as three-rocker type based on its function, besides the backboard and footboard can be lifted, the bed can receive inbuilt ascending and descending or; and the bed surface can be operated conveniently for nursing personnel while ascending, and the effective maximal height of guardrail would be achieved while descending.(If apply the ascending and descending method of common medical bed, the guardrail with a height of 60cm would result in that it cannot be operated for higher bed).